There is no water supply to my toilet

Discussion in 'Introductions' started by cm83, Jun 3, 2012.

  1. Jun 3, 2012 #1

    cm83

    cm83

    cm83

    New Member

    Joined:
    Jun 3, 2012
    Messages:
    1
    Likes Received:
    0
    There is no water supply to my toilet even when i turn the valve but everything else has water, what do I need to check to solve the problem?
     
  2. Jun 3, 2012 #2

    AlwaysOneMoreProject

    AlwaysOneMoreProject

    AlwaysOneMoreProject

    Active Member

    Joined:
    Oct 28, 2010
    Messages:
    43
    Likes Received:
    0
    Replace the fill valve.
     
  3. Jun 6, 2012 #3

    CallMeVilla

    CallMeVilla

    CallMeVilla

    Well-Known Member

    Joined:
    Feb 9, 2010
    Messages:
    1,651
    Likes Received:
    594
    Your angle stop is faulty. Turn off water to house and replace it.
     
  4. Jun 7, 2012 #4

    Underdog

    Underdog

    Underdog

    Well-Known Member

    Joined:
    May 4, 2012
    Messages:
    51
    Likes Received:
    8
    I keep a 5 gallon bucket around for just such an occasion.
     
  5. Jun 7, 2012 #5

    IntexInspector

    IntexInspector

    IntexInspector

    IntexInspector

    Joined:
    Jun 7, 2012
    Messages:
    2
    Likes Received:
    0
    Close your s/o valve ,remove supply line, easy easy turn valve on just so water comes to top of valve, this will make sure the problem is not in the supply.I have seen lines with 2 s/o ,so these is why I started with the supply.If you have supply then like a previous post said replace your fill valve
     

Share This Page