ITParalegal
Member
- Joined
- Jun 1, 2007
- Messages
- 10
- Reaction score
- 0
I replaced my a/c filter on a house I just bought yesterday and saw something I have never seen before:
The line that connects my thermostat to the outside a/c unit was coming out of the duct work then into the wall.
The thermostat being mounted right above the air intake vent.
I am not sure how far along the line runs through the duct or if the installer just puchtured a hole in the duct and stuck the line in that way.
Is there anything wrong with this?
The line that connects my thermostat to the outside a/c unit was coming out of the duct work then into the wall.
The thermostat being mounted right above the air intake vent.
I am not sure how far along the line runs through the duct or if the installer just puchtured a hole in the duct and stuck the line in that way.
Is there anything wrong with this?