To Square or not to square,that is the question

Discussion in 'Framing and Foundation' started by Tylon, Sep 11, 2007.

  1. Sep 11, 2007 #1

    Tylon

    Tylon

    Tylon

    Member

    Joined:
    Sep 11, 2007
    Messages:
    5
    Likes Received:
    0
    Hello everyone ,

    Got a question that I hope someone can offer some advice on.

    The project I am working on currently is I removed the wall between my master bedroom closet and the closet in my office in order to expand and organise the master closet for the wife. Now that I have everything demolished I have noticed that the space I am working on is far from being square.

    I would like some help to know what is the best way to proceed with this so it does not look like it was done shoddy. At this point should I build a new frame without messing with the original framing? should I just do what ever it takes to modify and add on to the existing framing to make it square? or should I just forget about it and just work with what I got and make it work?


    thanks in advance

    -T
     
  2. Sep 11, 2007 #2

    Tylon

    Tylon

    Tylon

    Member

    Joined:
    Sep 11, 2007
    Messages:
    5
    Likes Received:
    0
    Actually I think I anwsered my own question on this, by reading alot of material on this board.

    What I am going to do is I am going to rip some 2x12's into the sizes I need and build ontothe origional frames make make everything true and square.

    thanks

    -T
     
  3. Sep 11, 2007 #3

    Daryl in Nanoose

    Daryl in Nanoose

    Daryl in Nanoose

    Well-Known Member

    Joined:
    Feb 3, 2006
    Messages:
    769
    Likes Received:
    9
    Gladd we could help:D :D :D
     
  4. Sep 13, 2007 #4

    inspectorD

    inspectorD

    inspectorD

    Housebroken Staff Member Admin Moderator

    Joined:
    Dec 17, 2005
    Messages:
    4,503
    Likes Received:
    267
    I LOVE the easy ones......;)
     

Share This Page