ccpyue
Well-Known Member
- Joined
- Feb 1, 2011
- Messages
- 115
- Reaction score
- 15
Hi,
I have an 8 years old underground irrigation system with a Rain Sensor installed. I use it every summer and seems working very well. This summer, I tried to test the Rain Sensor. I made sure the system is passed through the Rain Sensor. When it start irrigating, I used a sprayer to spray water over the Rain Sensor, it did not stop the system from working. So I tried to set the system will work in about 5 minutes time, and I start spraying water over the Rain Sensor continuously, but the system still work after the 5 minutes. I have tried to set the Rain Sensor 1/8, 1/4, 1/2 etc. Outcomes are all the same.
Could anyone tell me how is the Rain Sensor works, and is it possible to fix it?
Thank you.
(see photo)
I have an 8 years old underground irrigation system with a Rain Sensor installed. I use it every summer and seems working very well. This summer, I tried to test the Rain Sensor. I made sure the system is passed through the Rain Sensor. When it start irrigating, I used a sprayer to spray water over the Rain Sensor, it did not stop the system from working. So I tried to set the system will work in about 5 minutes time, and I start spraying water over the Rain Sensor continuously, but the system still work after the 5 minutes. I have tried to set the Rain Sensor 1/8, 1/4, 1/2 etc. Outcomes are all the same.
Could anyone tell me how is the Rain Sensor works, and is it possible to fix it?
Thank you.
(see photo)
Last edited by a moderator: