ccpyue
Well-Known Member
- Joined
- Feb 1, 2011
- Messages
- 115
- Reaction score
- 15
I bought a sink faucet (photo 1). It is very nice faucet until I installed it and turned it on by about half turn of the handle, water splash all over the counter (photo 2). This is because the water coming out at a 45 degree angle, and hit the side of sink hard and cause water splash all over. To avoid that, I can only turn on the water handle about 1/5 of full turn. So water just a bit better than dripping out.
If the water coming out in a more straight downward way, probably will solve this problem. Unfortunately there is no way I can change the sprout direction.
Could some experts can suggest to me a way to solve this problem?
![20160302_164707.jpg 20160302_164707.jpg](https://cdn2.imagearchive.com/houserepairtalk/data/attachments/9/9711-257f99905fd771d10cc8a0adcc521e23.jpg)
![IMG_20150307_104114.jpg IMG_20150307_104114.jpg](https://cdn2.imagearchive.com/houserepairtalk/data/attachments/9/9712-17c22ec10e631c34a7939a2f52dcd153.jpg)
If the water coming out in a more straight downward way, probably will solve this problem. Unfortunately there is no way I can change the sprout direction.
Could some experts can suggest to me a way to solve this problem?
![20160302_164707.jpg 20160302_164707.jpg](https://cdn2.imagearchive.com/houserepairtalk/data/attachments/9/9711-257f99905fd771d10cc8a0adcc521e23.jpg)
![IMG_20150307_104114.jpg IMG_20150307_104114.jpg](https://cdn2.imagearchive.com/houserepairtalk/data/attachments/9/9712-17c22ec10e631c34a7939a2f52dcd153.jpg)