1200 makita charger

Discussion in 'Electrical and Wiring' started by jonesrsrg, Jun 18, 2009.

  1. Jun 18, 2009 #1

    jonesrsrg

    jonesrsrg

    jonesrsrg

    New Member

    Joined:
    Jun 18, 2009
    Messages:
    1
    Likes Received:
    0
    im having problems with a cordless makita drill battery charger and was wondering if anyone can help me. when i put a battery pack into the charger it doesnt start charging. ive checked the transformer it checks out ok. i checked out the start button , reset button , it seems like the reset button isnt working , is there a way to check all these out maybe im doing it wrong. this charger is for 12 volt batteries. any help at all would be greatly appreciated . dont wanna have to go spend money on a charger unless i have to
     
  2. Aug 17, 2009 #2
    Ohm out the reset button to test it for continuity. You could try bypassing the reset with a jumper...be careful. You take it to where you got it from and have them test it out. Just be sure to take your batteries with you. Also go to Makita's website and look for tech support. It might be under warranty. If you didn't break any seals.
     
  3. Aug 17, 2009 #3

    kok328

    kok328

    kok328

    Well-Known Member

    Joined:
    Nov 20, 2007
    Messages:
    2,755
    Likes Received:
    249
    It could be the chargers way of telling you the battery is no longer chargeable.
     

Share This Page