Advise on replacing old countertops with granite

Discussion in 'Decorating and Design' started by sschoenling@yahoo.com, Sep 27, 2009.

  1. Sep 27, 2009 #1

    sschoenling@yahoo.com

    sschoenling@yahoo.com

    sschoenling@yahoo.com

    New Member

    Joined:
    Sep 27, 2009
    Messages:
    1
    Likes Received:
    0
    Thinking about replacing laminate kitchen countertops with granite. Heard prices have come down. Not sure how to tackle a project this big. An advice?
     
  2. Sep 27, 2009 #2

    RTF

    RTF

    RTF

    Member

    Joined:
    Sep 13, 2009
    Messages:
    5
    Likes Received:
    0
    Contact three or more granite companies in your area and have them come out and measure your current layout, give you an estimate and install date. Most of these companies will remove your old counter tops prior to installing the new ones. You can save a few bucks if you demo them yourself. Make sure you cover any cut outs prior to fabrication.
     
  3. Sep 28, 2009 #3

    Nestor_Kelebay

    Nestor_Kelebay

    Nestor_Kelebay

    Emperor Penguin

    Joined:
    Mar 29, 2009
    Messages:
    1,844
    Likes Received:
    2
    Sschoenling:

    Unless you've got a lot of experience with this, or have the tools needed to polish granite, then I think you're biting off more than you can chew. Making and installing a granite counter top is not a DIY project except for someone who polishes granite headstones, or has the tools and equipment to do that kind of work.

    If you have a square edge laminate counter top, my advice to you would be to remove the laminate from the counter top, and install a prefab laminate counter top over your existing plywood. That IS a DIY project, but it's still gonna require you to buy about $300 worth of tools and $100 (or more) worth of prefab laminate counter top, and some plastic laminate to finish the square edges of the top you have now. That can cost anywhere from $4 to $60 for anything from a handipanel to a 4X8 sheet of laminate.

    If you want to see what such an installation looks like, I've done it inALL but one of my 21 kitchens, and you can see pictures at:

    http://users.usinternet.com/nkelebay

    You'll need a plastic laminate trimmer, an electric drill, a jig saw, a belt sander, a bastard flat file, a 3/ 16" chain saw file, and maybe a fine flat file. And, of course, you're going to need a helper occasionally to lift the top into place to mark it, and take it back down again to cut it. But, that's nothing compared to the cost of the grinder and diamond disks needed to polish granite.

    http://www.tools4solidsurface.com
     
    Last edited: Sep 28, 2009
  4. Sep 29, 2009 #4

    Huh?

    Huh?

    Huh?

    Active Member

    Joined:
    Sep 29, 2009
    Messages:
    28
    Likes Received:
    0
    I agree with Nestor, its a hassle. My mother inlaw just had granite tops installed and the just overlayed her old counters. I watched them until they got tired of me watching them. They just put an epoxy down and had all the pieces measured and cut. Took em three days including measuring.
     
  5. Sep 29, 2009 #5

    kok328

    kok328

    kok328

    Well-Known Member

    Joined:
    Nov 20, 2007
    Messages:
    2,755
    Likes Received:
    249
    While prices may have come down, a mistake or mishandling can be expensive.
    I personally would not consider this a DIY project.
     
  6. Oct 17, 2009 #6

    jjm

    jjm

    jjm

    Member

    Joined:
    Jul 22, 2009
    Messages:
    11
    Likes Received:
    0
    We replaced our kitchen countertops with a high end laminate that has texture. It was a charcoal gray, actually, and it was stunning. Cheaper than granite and lovely.
     
  7. Oct 19, 2009 #7

    granite-girl

    granite-girl

    granite-girl

    Well-Known Member

    Joined:
    Oct 19, 2009
    Messages:
    204
    Likes Received:
    0
    Granite countertops definitely is not a DIY project. That doesn't mean you can't DIY part of it. Your existing tops need to come of & there can be some cabinet leveling after they are removed. A lot of people will put a stone or tile backsplash up after the granite goes in. There's always the plumbing install & hookups afterwards also.
    I would contact 2-3 granite suppliers/fabricators, get your pricing & let them do the heavy /hard part.
    Good Luck
     
  8. Jan 15, 2010 #8

    Countertop Guy

    Countertop Guy

    Countertop Guy

    Member

    Joined:
    Jan 15, 2010
    Messages:
    6
    Likes Received:
    0
    I also agree with Granite -girl , contact 2-3 granite suppliers/fabricators to get some suggestion about prices and granite color.
     

Share This Page