harborremodel
Well-Known Member
- Joined
- Oct 9, 2017
- Messages
- 45
- Reaction score
- 7
I’m installing some cabinets that are set away from the wall about 6” to allow for a little extra counter depth. I need to bring electrical from an existing box behind the cabinet out to the back wall of the cabinet to power the disposal and hot water tap. My plan was to run a cover plate on the existing box that accepts an NM clamp and run some 12-2 (existing circuit is 20amp) over to a box mounted flush on the back of the cabinet. Is this the correct way or is there another proper way? The area behind the cabinet is inaccessible once the counters go on. Thanks for any help!