MassWineGuy
Well-Known Member
- Joined
- May 30, 2012
- Messages
- 56
- Reaction score
- 3
The north side of my house has quite a few spots that need repainting. But overall, it looks pretty good. I really don't want to take every inch of clapboard down to bare wood. This is my plan:
- Scrape and wire brush off only areas with loose or peeling paint.
- Sand entire surface enough so new paint adheres.
- Wash entire surface with anti mildew spray and rinse well.
- Repair any cracks and broken clapboards.
- Spot prime the scraped and repaired sections.
- Any clapboard with primer gets top coated entirely.
Does this seem reasonably promising?
Thank you very much.
- Scrape and wire brush off only areas with loose or peeling paint.
- Sand entire surface enough so new paint adheres.
- Wash entire surface with anti mildew spray and rinse well.
- Repair any cracks and broken clapboards.
- Spot prime the scraped and repaired sections.
- Any clapboard with primer gets top coated entirely.
Does this seem reasonably promising?
Thank you very much.