redwood1922
Junior Member
- Joined
- Aug 6, 2011
- Messages
- 33
- Reaction score
- 4
I am starting to rough in a new 12" deep utility sink, no garbage disposal or water filter, using existing 1 1/2" copper drain, existing copper supply, and new 1 1/2" ABS vent. Plumber will set angle of p-trap arm and check everything.
What's the shortest poss. tailpiece, are there better and worse p-traps and sanitary tees for not hogging up space? Can I win any space by selecting copper or something else for these parts? These no-hub couplers and the code seem to let me pick materials almost at random for drain, waste, and vent. There was a spot in the crawlspace where copper vent pipe helped bec. nothing else would physically fit.
What's the shortest poss. tailpiece, are there better and worse p-traps and sanitary tees for not hogging up space? Can I win any space by selecting copper or something else for these parts? These no-hub couplers and the code seem to let me pick materials almost at random for drain, waste, and vent. There was a spot in the crawlspace where copper vent pipe helped bec. nothing else would physically fit.