Need some advice on the best tool or method to trim the sides of my oak faceframe cabinets. I need a new refrigerator and the opening between the wall and the cabinets is 35 1/2 inches. The new refrigerators I have looked at are 35 3/4 inch wide. I don't want a 33 inch model. I was thinking about removing the cabinets and trimming approx. 1/16 inch of the edge of the face frame. Six cabinets trimmed 1/16 on each side will gain me 3/4 inch total when reassembled back together. The trimmed edges need to be straight and accurate because they butt together. I know its alot of work, but I don't want to modify the wall.