Mold??

Discussion in 'Painting Forum' started by aquamar38, Mar 2, 2013.

  1. Mar 2, 2013 #1

    aquamar38

    aquamar38

    aquamar38

    New Member

    Joined:
    Jan 27, 2013
    Messages:
    1
    Likes Received:
    0
    I want to do some home improvement projects but want to know how to fix the issue that I am sending pics. I want to use hardware to put up window furnishings but want to know how to fix the problem on the wall before I start this project

    2013-03-02 12.59.33.jpg

    2013-03-02 12.59.23.jpg

    2013-03-02 12.59.10.jpg

    2013-03-02 12.59.02.jpg

    2013-03-02 12.58.57.jpg

    2013-03-02 12.58.53.jpg

    2013-03-02 12.58.44.jpg

    2013-03-02 12.58.49.jpg

    2013-03-02 12.58.39.jpg

    2013-03-02 12.58.32.jpg
     
  2. Mar 2, 2013 #2

    inspectorD

    inspectorD

    inspectorD

    Housebroken Staff Member Admin Moderator

    Joined:
    Dec 17, 2005
    Messages:
    4,503
    Likes Received:
    267
    First question is...is this a concrete/block wall? Or is it a wooded/ sheetrocked wall?

    Also....You need to control the water on the outside to go away from this area, regardless of what the wall is made of. Probably have to fix a gutter or downspout so this problem does not come back..
     
  3. Mar 4, 2013 #3

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,899
    Likes Received:
    3,118
    The mold should be tested and then work on a safe plan for removel first.
     
  4. Mar 4, 2013 #4

    inspectorD

    inspectorD

    inspectorD

    Housebroken Staff Member Admin Moderator

    Joined:
    Dec 17, 2005
    Messages:
    4,503
    Likes Received:
    267
    I do not think this is mold from the pictures, I think it is effloresence on concrete. Lets hope the walls are concrete...:D
     
  5. Mar 4, 2013 #5

    Fireguy5674

    Fireguy5674

    Fireguy5674

    Junior Member

    Joined:
    Dec 15, 2012
    Messages:
    184
    Likes Received:
    35
    Or maybe the walls are brick?
     
  6. Mar 4, 2013 #6

    bud16415

    bud16415

    bud16415

    Fixer Upper Staff Member Admin Moderator

    Joined:
    Feb 5, 2013
    Messages:
    4,663
    Likes Received:
    1,602
    It is most defiantly efflorescence in the concrete or mortar used to patch in around the window and then covered with thick paint. There was water at some time acting with the salts in the mortar causing it. Chances are if you scrape it off and repaint it will come back in time. Dig it out and clean with a mild acid and you will have a better idea what is in there bricks or concrete etc. then you can chip it out and replace with a better product. As mentioned above take a look and see if water is getting in from the outside also.
     
  7. Mar 4, 2013 #7

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,899
    Likes Received:
    3,118
    efflorescence, indicates moisture. The wrong paint, dust on the wall and wood in the area all a food sources for mold. To say there is no mold is not a responcible statement. It should still be checked.
     
  8. Mar 5, 2013 #8

    bud16415

    bud16415

    bud16415

    Fixer Upper Staff Member Admin Moderator

    Joined:
    Feb 5, 2013
    Messages:
    4,663
    Likes Received:
    1,602
    Nealtw is correct there could be mold also. Diagnosing the main problem should never rule out secondary problems. If you look closely at the wood trim you can see spots that could be mold. Most old structures that have any kind of water intrusion problems most likely will have some mold to deal with. Likewise the old paint that will be getting removed could contain lead and the cracks could contain some kind of asbestos insulation etc. If it’s a DIY project always error on the side of caution and wear at min a dust mask and goggles when digging into a problem like this. Shop vac as you go and try and keep the dust down.

    One of my pet peeves is there are a lot of building shows on tv now geared to the DIYer. And they always make a big deal about the demo and hand the homeowners a sledge hammer and have them smashing away like crazy people. That’s about the stupidest way to demo something and makes a mess 10 times as big to clean up. But it does make for good tv.
     

Share This Page