drumz
Well-Known Member
- Joined
- Jul 10, 2011
- Messages
- 75
- Reaction score
- 9
First off please, my heater is capable of handling twice the entire 1500 sf house including the basement which it originally heated; remodeled 4 years ago and added new intake, trunk, simplifying runs, tying old with new but same plant (20 yrs). I'm trying to figure out basically 2 things, reducing the amount of drop up and venting the entire room which will have a bathroom. The video shows the trunk and the runs to the left and at the first 90 which then 90's up to the kitchen above.
1) Can I get that run up to the kitchen tighter to the ceiling?
2) I need to heat the bathroom area and the rest of the room. I was thinking of adding a vent to the trunk but wasn't sure about where to put one in the bathroom. I'm building a soffit and plan on adding a fan to that so maybe I should put the vent in-between the 2 90's?
Any advice is appreciated.
Basement video
1) Can I get that run up to the kitchen tighter to the ceiling?
2) I need to heat the bathroom area and the rest of the room. I was thinking of adding a vent to the trunk but wasn't sure about where to put one in the bathroom. I'm building a soffit and plan on adding a fan to that so maybe I should put the vent in-between the 2 90's?
Any advice is appreciated.
Basement video