Opinions please. Is my wood floor worth restoring? Pics inside

Discussion in 'Flooring' started by jayrod, Aug 9, 2010.

  1. Aug 9, 2010 #1

    jayrod

    jayrod

    jayrod

    Well-Known Member

    Joined:
    Jan 20, 2010
    Messages:
    67
    Likes Received:
    1
    On our stairs, the carpet is absolute rubbish. So much in fact that it looks 100 times better if I just pulled it up and left the floor bare. House was built in 1974. The wood floor underneath the carpet is in good shape. Im wondering if it is worth the effort to try and refinish it. If you look on the 2nd pic, the flooring overhangs each step by about 2 inches. I have no problem doing the work, filling the holes, etc as I am a paint and body man by trade but I came here to get an idea of what everyone else would do. Is this a good idea? Does this look like your usual hardwood project?
    Thanks.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. Aug 9, 2010 #2

    oldognewtrick

    oldognewtrick

    oldognewtrick

    Administrator Staff Member Admin Moderator

    Joined:
    Jul 26, 2009
    Messages:
    10,815
    Likes Received:
    1,433
    Jayrod, the wood you are seeing is sub flooring and not meant for finishing. Put carpet back or hardwood over the sub flooring. The sub floor is usually pine and soft. Its purpose is to add structure between the floor joists. It wont hold up to foot traffic well.
     
  3. Aug 9, 2010 #3

    jayrod

    jayrod

    jayrod

    Well-Known Member

    Joined:
    Jan 20, 2010
    Messages:
    67
    Likes Received:
    1
    Okay. I wasnt sure about that. How much harder is it to put laminate flooring on stairs than a regular room or hallway? Im not sure how you would do stairs.
     
  4. Aug 10, 2010 #4

    Nestor_Kelebay

    Nestor_Kelebay

    Nestor_Kelebay

    Emperor Penguin

    Joined:
    Mar 29, 2009
    Messages:
    1,844
    Likes Received:
    2
    Jayrod:

    I agree with Oldog/Newtrick. What you have in those pictures is NOT hardwood flooring that just needs to be refinished. It's 1X6 fir boards that form the sub-floor in your house.

    Typically, in a house you'll have the floor joists. Then the subfloor will be installed and will consist of either 3/4 inch plywood or 1X6 lumber nailed either perpendicular or at a 45 degree angle to the floor joists. Then all the interior and exterior walls are built on top of the subfloor. Then, "underlayment" which will by plywood or particle board between 1/4 and 3/8 inch in thickness will be nailed down over the subfloor in each "room". Then, after everything else has been done, the finish flooring (carpet, sheet vinyl, laminate or whatever) is installed on top of the underlayment.

    The purpose in having that underlayment is to prevent the joints between the sheets of 3/4 inch tongue and groove plywood or 1X6 lumber boards from "telegraphing" and showing through onto the new finish flooring. However, an important advantage in having that underlayment layer in there is so that if push comes to shove, you can always remove the old flooring by prying up and disposing of the old underlayment, and installing new underlayment for a fresh start. That avoids all of the difficulty in removing old flooring that's securely glued down to the underlayment.

    So, if I wuz you, the first step would be to nail 1/4, 5/16 or 3/8 inch fir UNDERLAYMENT over top of your fir 1X6 subfloor. (Fir underlayment will look identical to fir plywood. The difference is that fir plywood is allowed to have voids in it's interior plys, whereas in fir underlayment, any such voids are filled with water putty to prevent "soft spots" on the floor that could cause trouble under the finish flooring. In my view, the BEST underlayment you can get is fir underlayment (which looks just like thin fir plywood) or "Baltic Birch" which is a furniture grade hardwood plywood that comes in metric sizes from Russia.

    Go to Johnsonite > Home and click on their "Stairwell Management" link to get to this web page:

    Johnsonite > Finishes & Accessories > Stairwell Management

    Once there, click on the "Download the Stairwell Management Brochure" link on the right side of the screen.

    Go to the last page of that 8 page brochure to see the vinyl stair nosing profiles available in 48 different colours from Johnsonite. Note that the VCD-XX and SVCD-XX-A have lips that will accomodate either 1/4 inch thick or 3/8 inch thick flooring, respectively.

    So, one gameplan would be to order the vinyl stair nose moldings from any carpet retailer or flooring supply store and install them on your stair nosings.

    Then, make templates of the stair treads and risers from cardboard, and use those templates to cut out pieces of laminate or carpet to match the size and shape of the template. Then, just use masking tape to mask off the tread or riser so that you don't have to be as careful spreading the glue with a trowel. Then, tuck one end of the finish flooring material into the lip of the nosing and press the flooring material into the tacky glue.

    And, of course, having nailed underlayment over the stair treads and risers, removing the old glued down laminate or carpet on the steps will be easy since you can always pry the old underlayment off with the finish flooring still stuck to it.
     

Share This Page