Painting vs Staining Stair Treads

Discussion in 'Painting Forum' started by Jaybird VuCE, Oct 28, 2013.

  1. Oct 28, 2013 #1

    Jaybird VuCE

    Jaybird VuCE

    Jaybird VuCE

    Jaybird VuCE

    Joined:
    Dec 16, 2006
    Messages:
    7
    Likes Received:
    0
    I am looking for input on staining vs. painting stair treads. We recently pulled off the carpet on our stairs. We are debating whether to paint our treads or strain them, i think we should stain and polyurethane (water based). Treads are southern yellow pine. I would paint risers white. If you have done paint, I would like to know how the stairs held up six months to a year after painting. I have only found reviews of people who painted stairs recently with no details of maintenance, slippery treads, etc.
     
    Last edited: Oct 29, 2013
  2. Oct 29, 2013 #2

    bud16415

    bud16415

    bud16415

    Fixer Upper Staff Member Admin Moderator

    Joined:
    Feb 5, 2013
    Messages:
    4,654
    Likes Received:
    1,597
    I personally would go with stain and finish if they look nice and will clean up. You can always go and paint them down the road. It’s much harder to go the other way. I have painted a lot of stairs in old homes that had damage or had been painted before or budget was small. The floor paints hold up well but show wear and tear. But you just clean them up and paint again when that time comes. Some people paint and then use a tread protector also.
     
    Jaybird VuCE likes this.
  3. Oct 29, 2013 #3

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,892
    Likes Received:
    3,117
    If you like the paint you can always clear coat over it.
     
    Jaybird VuCE likes this.
  4. Oct 30, 2013 #4

    CallMeVilla

    CallMeVilla

    CallMeVilla

    Well-Known Member

    Joined:
    Feb 9, 2010
    Messages:
    1,651
    Likes Received:
    594
    Your decision is a DESIGN choice, not a performance choice. Depending on the motif of your decoration and house style, you should choose accordingly.

    Either way, stain and a good poly finish is the best option from a looks standpoint. You can go with a dark (espresso) stain if you want to pop the white ... or a "woodie" look using a lighter stain.

    In both cases, a white painted riser is best.

    Stair riser painted 1.jpg
     
  5. Oct 30, 2013 #5

    DFBonnett

    DFBonnett

    DFBonnett

    Retired decorating contractor

    Joined:
    Apr 17, 2012
    Messages:
    208
    Likes Received:
    61
    OP,
    I did a job like that a couple of years back. Stain and varnish is the way to go. It doesn't show anywhere near the scuffing that paint will. I saw the stairs again recently while there for another reason and they still look great. Instead of a water based urethane, I'd use a solvent based marine varnish. It will be almost as durable as a solvent based urethane and will require much less prep when the time comes to recoat and the time WILL come to recoat.
     
    CallMeVilla likes this.
  6. Oct 30, 2013 #6

    CallMeVilla

    CallMeVilla

    CallMeVilla

    Well-Known Member

    Joined:
    Feb 9, 2010
    Messages:
    1,651
    Likes Received:
    594
    DFB is completely right. I use marine varnish all the time. Highly durable, particularly if you use multiple coats. I recently built several bamboo playwood table tops ... using marine varnish because they will be outdoors.

    They came out really smashing. Here they are while drying.

    Tables.jpg
     

Share This Page