Planer or Jointer

Discussion in 'Carpentry and Woodworking' started by jmc0319, Apr 1, 2013.

  1. Apr 1, 2013 #1

    jmc0319

    jmc0319

    jmc0319

    Well-Known Member

    Joined:
    Jun 13, 2012
    Messages:
    283
    Likes Received:
    32
    I am a newbie wood worker and am building up my shop. Have band saw, table saw, mitre saw, router table and am now looking for my new tool. I am thinking about a planer or a jointer and can not decide. I am thinking a jointer with a tab rabetting table would be more functional. I like to make tables, cutting boards, trivets and other types of furniture.

    I would love to know from the pros which tool you would choose and why please.

    Thanks.
     
  2. Apr 1, 2013 #2

    JoeD

    JoeD

    JoeD

    Well-Known Member

    Joined:
    Mar 16, 2006
    Messages:
    1,524
    Likes Received:
    273
    I have never used a jointer for rabbeting. Use the table saw for that. Jointer is used for making boards flat and square. Planer is used for making board uniform thickness.
    If you work with rough sawn lumber you sort of need both.
     
  3. Apr 1, 2013 #3

    jmc0319

    jmc0319

    jmc0319

    Well-Known Member

    Joined:
    Jun 13, 2012
    Messages:
    283
    Likes Received:
    32
    Thanks Joe
     
  4. Apr 1, 2013 #4

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,890
    Likes Received:
    3,117
    You can do jointing with the routeruntil you figure it's worth having a dedicted machine. I picked up an old Beaver jointer circa 1950 works fine for $75.
     
  5. Apr 2, 2013 #5

    jmc0319

    jmc0319

    jmc0319

    Well-Known Member

    Joined:
    Jun 13, 2012
    Messages:
    283
    Likes Received:
    32
    Thanks Neal. I am leaning toward the planer for now and then later the jointer.
     
  6. Apr 2, 2013 #6

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,890
    Likes Received:
    3,117
    I have a 12" thickness planer and found it to be pain to set up and use, can't say that I mastered it. Got my hands on an old double drum thickness sander and never used the planner since. There are lots of plans for home built or you could opt for a nice one, open on one side so you could sand wide material. Just something else to think about.
     
  7. Apr 2, 2013 #7

    jmc0319

    jmc0319

    jmc0319

    Well-Known Member

    Joined:
    Jun 13, 2012
    Messages:
    283
    Likes Received:
    32
    Food for thought. Thanks
     
  8. Apr 5, 2013 #8

    elbo

    elbo

    elbo

    Well-Known Member

    Joined:
    Nov 27, 2011
    Messages:
    211
    Likes Received:
    98
    I have both, a planer and jointer. I use the planer all the time and the jointer sits and gathers sawdust.When I have to glue up several boards to make one wide one I use the table saw. How I do this is this. I determine which sides I want to have exposed, then mark each piece with chalk on the preferred side. I then saw the first board with the chalk up and the second with the chalk down, and continue in this manner until I reach the desired size. The reason for alternating is to compensate for any slight varience from a true 90 degrees. then glue up the pieces with the chalk mark up, making certain that the boards are true across the top. any difference , I run it through the planer. If the board is too wide for the planer , I sand it even
     
    nealtw likes this.

Share This Page