Repair Recommendations for Washed Aggregate Expansion Joint

Discussion in 'Bricks, Masonry and Concrete' started by billhead1, Jul 16, 2012.

  1. Jul 16, 2012 #1
    What is recommended in place of the unsightly polyethylene based caulks for expansion joints on washed aggregate or concrete (see photo)?

    Washed Aggregate.jpg
     
    Last edited by a moderator: Jul 16, 2012
  2. Jul 17, 2012 #2

    BridgeMan

    BridgeMan

    BridgeMan

    Well-Known Member

    Joined:
    Aug 11, 2011
    Messages:
    744
    Likes Received:
    80
    Remove all the ugly stuff, fill the joint with a decent polyurethane sealant and then immediately broadcast the top with quartz or silicon sand to match.
     

Share This Page