rgv
Member
- Joined
- Mar 27, 2024
- Messages
- 11
- Reaction score
- 0
Plan to build a roofed pergola on the balcony of a 2-store house. The plan is attached, removed rails from the schema for visibility.
Can't drill the structure or walls.
For the ground and load-bearing parts plan to use 4by4 in pressure-treated posts.
To connect 4by4s plan to use mortise and tenon joints, Titebond III Ultimate Wood Glue and wood screws.
For the longest parts that connect load-bearing posts on the top plan to glue together two 4by2s to make it stronger than 4by4. The distance between load-bearing posts is 4m and 2m.
The roof will be covered by polycarbonate.
Trying to make it sturdy in case the snow+rain accumulation on the roof since the slope is just 1:12 Pitch=5°.
Any advice or comment is appreciated.
Can't drill the structure or walls.
For the ground and load-bearing parts plan to use 4by4 in pressure-treated posts.
To connect 4by4s plan to use mortise and tenon joints, Titebond III Ultimate Wood Glue and wood screws.
For the longest parts that connect load-bearing posts on the top plan to glue together two 4by2s to make it stronger than 4by4. The distance between load-bearing posts is 4m and 2m.
The roof will be covered by polycarbonate.
Trying to make it sturdy in case the snow+rain accumulation on the roof since the slope is just 1:12 Pitch=5°.
Any advice or comment is appreciated.