I've got toilets that have 3 bolts for the tank. I think this is an older design. The bolts don't have a washer or nut between the tank and the base. There is only the one nut, so the base and the tank are squeezed together by the same force holding the bolt against the rubber washer inside the tank. I'm afraid to really crank on these nuts because well, no one wants to crack porcelain. But I'm having trouble getting them watertight.
What should I do?
1. Crank on those nuts harder
2. Apply some silicone caulk to the washer before putting it in.
3. Something else?
Thanks!
What should I do?
1. Crank on those nuts harder
2. Apply some silicone caulk to the washer before putting it in.
3. Something else?
Thanks!