1000r
New Member
I just replaced a 3-way switch. I am 99.9% sure I wired it the same as the existing switch. Now, when this switch is in the down position the other switch works properly. When the other switch is in the up position the new switch works properly. In any other position nothing works. I connected the black (hot) wire to the common terminal. The white wire is connected on the same side of the switch and the red wire is connected to the other side of the switch. This is how it was connected in the old switch. Any help is appreciated.
Source URL: 3-Way Switch Issue
Source URL: 3-Way Switch Issue