Help with drainage line for my sink.

Discussion in 'Plumbing Forum' started by BDP1999, Nov 23, 2010.

  1. Nov 23, 2010 #1

    BDP1999

    BDP1999

    BDP1999

    Member

    Joined:
    Nov 23, 2010
    Messages:
    11
    Likes Received:
    0
    Hello,

    I'm having a problem with the drain line for my bathroom sink. The stand has ceramic in the back which is blocking it's route to the drain in the wall. Doe's the p/s joint have to be below the main drain slot to work? Are there any certain shape pipes I can get to bypass cutting the mount of the sink? Does anyone have any suggestions?

    Metal pipping

    here are some pictures to help you see what i'm talking about...

    Drain base to Wall 6.5inches
    Drain base to blockage on sink stand 13.5inches
    Drain base to Wall main drain slot 7.25inches

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. Nov 26, 2010 #2

    BDP1999

    BDP1999

    BDP1999

    Member

    Joined:
    Nov 23, 2010
    Messages:
    11
    Likes Received:
    0
    fixed it, nevermind!
     
  3. Nov 29, 2010 #3

    Redwood

    Redwood

    Redwood

    Certified Lunatic

    Joined:
    Apr 14, 2009
    Messages:
    887
    Likes Received:
    0
    In the picture above your trap is installed backwards.
     
  4. Nov 30, 2010 #4

    BDP1999

    BDP1999

    BDP1999

    Member

    Joined:
    Nov 23, 2010
    Messages:
    11
    Likes Received:
    0
    Thanks, that wasn't the problem but I did get it fixed. I was just useing that picture as an example of the pipes being to long.
     

Share This Page