replacing a soffit

Discussion in 'Roofing and Siding' started by rmaybon, Sep 5, 2007.

  1. Sep 5, 2007 #1

    rmaybon

    rmaybon

    rmaybon

    New Member

    Joined:
    Sep 5, 2007
    Messages:
    1
    Likes Received:
    0
    I have a soffit next to the chimney that has a hole in it. What would be the procedure in replacing this section of the soffit. Also, type of soffit would be recommended - metal, vinal, or what ever.

    Thanks alot,
    rmaybon@aol.com
     
  2. Sep 6, 2007 #2

    travelover

    travelover

    travelover

    Well-Known Member

    Joined:
    Aug 5, 2007
    Messages:
    693
    Likes Received:
    2
    Maybe a posted picture would help...
     
  3. Sep 6, 2007 #3

    glennjanie

    glennjanie

    glennjanie

    Well-Known Member

    Joined:
    Mar 1, 2006
    Messages:
    2,990
    Likes Received:
    4
    Welcome to the Forum Rmaybon:
    Chimnies are very hard to deal with; If you no longer use it I would recommend removing it at least down below the roof line. Any penetration of the roof is a potential leak and chimnies are the worse.

    I had mine torn down below the roof line and covered over, closed the damper and use ventless gas logs in the fireplace. We still have the cozy look without the roof problems.

    If you still need yours, the best material would be vinyl. Make sure you have adequate ventilation, replace all rotten wood in the area and seal the roof tightly, using step flashing with the shingles and counter flashing over that. Also any cracks or missing mortar in the chimney must be replaced and using a sheet metal cap would help to keep the water out.

    Glenn
     

Share This Page